--- Libc/Libc-763.13/include/arpa/telnet.h
+++ Libc/Libc-1669.0.4/include/arpa/telnet.h
@@ -10,11 +10,7 @@
  * 2. Redistributions in binary form must reproduce the above copyright
  *    notice, this list of conditions and the following disclaimer in the
  *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
+ * 3. Neither the name of the University nor the names of its contributors
  *    may be used to endorse or promote products derived from this software
  *    without specific prior written permission.
  *
@@ -33,8 +29,8 @@
  *	@(#)telnet.h	8.2 (Berkeley) 12/15/93
  */
 
-#ifndef _TELNET_H_
-#define	_TELNET_H_
+#ifndef _ARPA_TELNET_H_
+#define	_ARPA_TELNET_H_
 
 /*
  * Definitions for the TELNET protocol.
@@ -63,10 +59,11 @@
 #define SYNCH	242		/* for telfunc calls */
 
 #ifdef TELCMDS
-char *telcmds[] = {
+const char *telcmds[] = {
 	"EOF", "SUSP", "ABORT", "EOR",
 	"SE", "NOP", "DMARK", "BRK", "IP", "AO", "AYT", "EC",
-	"EL", "GA", "SB", "WILL", "WONT", "DO", "DONT", "IAC", 0,
+	"EL", "GA", "SB", "WILL", "WONT", "DO", "DONT", "IAC",
+	0
 };
 #else
 extern char *telcmds[];
@@ -119,12 +116,17 @@
 #define	TELOPT_AUTHENTICATION 37/* Authenticate */
 #define	TELOPT_ENCRYPT	38	/* Encryption option */
 #define TELOPT_NEW_ENVIRON 39	/* New - Environment variables */
+#define	TELOPT_TN3270E	40	/* RFC2355 - TN3270 Enhancements */
+#define	TELOPT_CHARSET	42	/* RFC2066 - Charset */
+#define	TELOPT_COMPORT	44	/* RFC2217 - Com Port Control */
+#define	TELOPT_KERMIT	47	/* RFC2840 - Kermit */
 #define	TELOPT_EXOPL	255	/* extended-options-list */
 
-
-#define	NTELOPTS	(1+TELOPT_NEW_ENVIRON)
+#define	COMPORT_SET_BAUDRATE	1	/* RFC2217 - Com Port Set Baud Rate */
+
+#define	NTELOPTS	(1+TELOPT_KERMIT)
 #ifdef TELOPTS
-char *telopts[NTELOPTS+1] = {
+const char *telopts[NTELOPTS+1] = {
 	"BINARY", "ECHO", "RCP", "SUPPRESS GO AHEAD", "NAME",
 	"STATUS", "TIMING MARK", "RCTE", "NAOL", "NAOP",
 	"NAOCRD", "NAOHTS", "NAOHTD", "NAOFFD", "NAOVTS",
@@ -134,11 +136,12 @@
 	"TACACS UID", "OUTPUT MARKING", "TTYLOC",
 	"3270 REGIME", "X.3 PAD", "NAWS", "TSPEED", "LFLOW",
 	"LINEMODE", "XDISPLOC", "OLD-ENVIRON", "AUTHENTICATION",
-	"ENCRYPT", "NEW-ENVIRON",
-	0,
+	"ENCRYPT", "NEW-ENVIRON", "TN3270E", "XAUTH", "CHARSET",
+	"RSP", "COM-PORT", "SLE", "STARTTLS", "KERMIT",
+	0
 };
 #define	TELOPT_FIRST	TELOPT_BINARY
-#define	TELOPT_LAST	TELOPT_NEW_ENVIRON
+#define	TELOPT_LAST	TELOPT_KERMIT
 #define	TELOPT_OK(x)	((unsigned int)(x) <= TELOPT_LAST)
 #define	TELOPT(x)	telopts[(x)-TELOPT_FIRST]
 #endif
@@ -196,18 +199,35 @@
 #define	SLC_XOFF	16
 #define	SLC_FORW1	17
 #define	SLC_FORW2	18
-
-#define	NSLC		18
-
-/*
- * For backwards compatability, we define SLC_NAMES to be the
+#define SLC_MCL         19
+#define SLC_MCR         20
+#define SLC_MCWL        21
+#define SLC_MCWR        22
+#define SLC_MCBOL       23
+#define SLC_MCEOL       24
+#define SLC_INSRT       25
+#define SLC_OVER        26
+#define SLC_ECR         27
+#define SLC_EWR         28
+#define SLC_EBOL        29
+#define SLC_EEOL        30
+
+#define	NSLC		30
+
+/*
+ * For backwards compatibility, we define SLC_NAMES to be the
  * list of names if SLC_NAMES is not defined.
  */
-#define	SLC_NAMELIST	"0", "SYNCH", "BRK", "IP", "AO", "AYT", "EOR", \
-			"ABORT", "EOF", "SUSP", "EC", "EL", "EW", "RP", \
-			"LNEXT", "XON", "XOFF", "FORW1", "FORW2", 0,
+#define	SLC_NAMELIST	"0", "SYNCH", "BRK", "IP", "AO", "AYT", "EOR",	\
+			"ABORT", "EOF", "SUSP", "EC", "EL", "EW", "RP",	\
+			"LNEXT", "XON", "XOFF", "FORW1", "FORW2",	\
+			"MCL", "MCR", "MCWL", "MCWR", "MCBOL",		\
+			"MCEOL", "INSRT", "OVER", "ECR", "EWR",		\
+			"EBOL", "EEOL",					\
+			0
+
 #ifdef	SLC_NAMES
-char *slc_names[] = {
+const char *slc_names[] = {
 	SLC_NAMELIST
 };
 #else
@@ -262,13 +282,15 @@
 #define	AUTHTYPE_KERBEROS_V5	2
 #define	AUTHTYPE_SPX		3
 #define	AUTHTYPE_MINK		4
-#define	AUTHTYPE_CNT		5
+#define	AUTHTYPE_SRA		6
+#define	AUTHTYPE_CNT		7
 
 #define	AUTHTYPE_TEST		99
 
 #ifdef	AUTH_NAMES
-char *authtype_names[] = {
-	"NULL", "KERBEROS_V4", "KERBEROS_V5", "SPX", "MINK", 0,
+const char *authtype_names[] = {
+	"NULL", "KERBEROS_V4", "KERBEROS_V5", "SPX", "MINK", NULL, "SRA",
+	0
 };
 #else
 extern char *authtype_names[];
@@ -286,7 +308,7 @@
 #define	ENCRYPT_START		3	/* Am starting to send encrypted */
 #define	ENCRYPT_END		4	/* Am ending encrypted */
 #define	ENCRYPT_REQSTART	5	/* Request you start encrypting */
-#define	ENCRYPT_REQEND		6	/* Request you send encrypting */
+#define	ENCRYPT_REQEND		6	/* Request you end encrypting */
 #define	ENCRYPT_ENC_KEYID	7
 #define	ENCRYPT_DEC_KEYID	8
 #define	ENCRYPT_CNT		9
@@ -297,13 +319,14 @@
 #define	ENCTYPE_CNT		3
 
 #ifdef	ENCRYPT_NAMES
-char *encrypt_names[] = {
+const char *encrypt_names[] = {
 	"IS", "SUPPORT", "REPLY", "START", "END",
 	"REQUEST-START", "REQUEST-END", "ENC-KEYID", "DEC-KEYID",
-	0,
-};
-char *enctype_names[] = {
-	"ANY", "DES_CFB64",  "DES_OFB64",  0,
+	0
+};
+const char *enctype_names[] = {
+	"ANY", "DES_CFB64",  "DES_OFB64",
+	0
 };
 #else
 extern char *encrypt_names[];