Loading...
ppc/string/strncmp.s Libc-391 /dev/null
--- Libc/Libc-391/ppc/string/strncmp.s
+++ /dev/null
@@ -1,208 +0,0 @@
-/*
- * Copyright (c) 2002 Apple Computer, Inc. All rights reserved.
- *
- * @APPLE_LICENSE_HEADER_START@
- * 
- * This file contains Original Code and/or Modifications of Original Code
- * as defined in and that are subject to the Apple Public Source License
- * Version 2.0 (the 'License'). You may not use this file except in
- * compliance with the License. Please obtain a copy of the License at
- * http://www.opensource.apple.com/apsl/ and read it before using this
- * file.
- * 
- * The Original Code and all software distributed under the License are
- * distributed on an 'AS IS' basis, WITHOUT WARRANTY OF ANY KIND, EITHER
- * EXPRESS OR IMPLIED, AND APPLE HEREBY DISCLAIMS ALL SUCH WARRANTIES,
- * INCLUDING WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT OR NON-INFRINGEMENT.
- * Please see the License for the specific language governing rights and
- * limitations under the License.
- * 
- * @APPLE_LICENSE_HEADER_END@
- */
-#define	ASSEMBLER		// we need the defs for cr7_eq etc
-#include <mach/ppc/asm.h>
-#undef	ASSEMBLER
-
-#define	__APPLE_API_PRIVATE
-#include <machine/cpu_capabilities.h>
-#undef	__APPLE_API_PRIVATE
-
-/* We use mode-independent "g" opcodes such as "srgi".  These expand
- * into word operations when targeting __ppc__, and into doubleword
- * operations when targeting __ppc64__.
- */
-#include <architecture/ppc/mode_independent_asm.h>
-
-
-// *****************
-// * S T R N C M P *
-// *****************
-//
-// int	strncmp(const char *s1, const char *s2, size_t len);
-//
-// We optimize the compare by doing it word parallel.  This introduces
-// a complication: if we blindly did word loads from both sides until
-// finding a difference (or 0), we might get a spurious page fault by
-// reading bytes past the difference.  To avoid this, we never do a "lwz"
-// that crosses a page boundary.
-//
-// The test for 0s relies on the following inobvious but very efficient
-// word-parallel test:
-//		x =  dataWord + 0xFEFEFEFF
-//		y = ~dataWord & 0x80808080
-//		if (x & y) == 0 then no zero found
-// The test maps any non-zero byte to zero, and any zero byte to 0x80,
-// with one exception: 0x01 bytes preceeding the first zero are also
-// mapped to 0x80.
-//
-// This routine is doubleword parallel in 64-bit mode.
-
-        .text
-        .globl EXT(strncmp)
-
-        .align 	5
-LEXT(strncmp)                       // int strncmp(const char *s1,const char *s2,size_t len);
-        cmplgi	cr1,r5,GPR_BYTES*2  // buffer too short to bother? (WARNING: cr1 is used later)
-        andi.	r0,r3,GPR_BYTES-1   // is LHS aligned?
-        subi	r3,r3,GPR_BYTES     // we use "lgu" in the inner loops
-        subi	r4,r4,GPR_BYTES
-        blt		cr1,Lshort			// short buffer, just compare a byte at a time
-#if defined(__ppc__)
-        lis		r2,hi16(0xFEFEFEFF)	// start to generate 32-bit magic constants
-        lis		r6,hi16(0x80808080)
-        ori		r2,r2,lo16(0xFEFEFEFF)
-        ori		r6,r6,lo16(0x80808080)
-#else
-        ld		r2,_COMM_PAGE_MAGIC_FE(0)	// get 0xFEFEFEFE FEFEFEFF from commpage
-        ld		r6,_COMM_PAGE_MAGIC_80(0)	// get 0x80808080 80808080 from commpage
-#endif
-        beq		Laligned			// LHS is aligned
-        subfic	r0,r0,GPR_BYTES     // r0 <- #bytes to align LHS
-        mtctr	r0
-        sub     r5,r5,r0            // adjust length
-        b		Lbyteloop
-        
-// Handle short operands or end-of-buffer.
-//		r3 = LHS ptr - GPR_BYTES (unaligned)
-//		r4 = RHS ptr - GPR_BYTES (unaligned)
-//		r5 = length remaining in buffer (0..GPR_BYTES*2-1)
-//	   cr1 = blt set
-
-Lshort:
-        cmpgi	r5,0				// buffer null?
-        mtctr	r5					// assume not null, set up for loop
-        bne		Lbyteloop			// buffer not null
-        li		r3,0				// if buffer null, say "equal"
-        blr
-
-// We're at a RHS page boundary.  Compare GPR_BYTES bytes in order to cross the page
-// but still keep the LHS ptr word-aligned.
-//		r2 = 0xFEFEFEFF
-//		r3 = LHS ptr - GPR_BYTES (aligned)
-//		r4 = RHS ptr - GPR_BYTES (unaligned)
-//		r5 = length remaining in buffer (may be 0)
-//		r6 = 0x80808080
-
-Lcrosspage:
-        cmplgi	cr1,r5,GPR_BYTES*2  // not enough left in buffer for word compares?
-        li		r0,GPR_BYTES        // get #bytes to cross RHS page
-        blt		cr1,Lshort			// buffer is about to end
-        mtctr	r0					// set up to compare GPR_BYTES bytes
-        sub		r5,r5,r0			// adjust length
-        b		Lbyteloop
-        
-// Compare bytes, until 0-byte or difference found.
-//		r2 = 0xFEFEFEFF (if cr1 bge)
-//		r3 = LHS ptr - GPR_BYTES (unaligned)
-//		r4 = RHS ptr - GPR_BYTES (unaligned)
-//		r5 = length remaining in buffer (may be 0)
-//		r6 = 0x80808080 (if cr1 bge)
-//	   cr1 = blt if this is end of buffer
-
-        .align	5					// align inner loop, which is 8 words long
-Lbyteloop:
-        lbz		r7,GPR_BYTES(r3)    // next LHS byte
-        addi	r3,r3,1
-        lbz		r8,GPR_BYTES(r4)    // next RHS byte
-        addi	r4,r4,1
-        cmpwi	cr0,r7,0			// zero?
-        cmpw	cr7,r7,r8			// equal?
-        crandc	cr0_eq,cr7_eq,cr0_eq// set cr0_eq if equal and not 0
-        bdnzt	eq,Lbyteloop		// loop until different, 0, or (ctr==0)
-                
-        bne		Ldifferent			// done if bytes differ or are 0
-        blt		cr1,Ldifferent		// done if buffer end (ie, if r5==0)
-        
-// LHS is now aligned.  Loop over words or doublewords until end of RHS page
-// or buffer.  When we get to the end of the page, we compare GPR_BYTES bytes,
-// so that we keep the LHS aligned.
-//		r2 = 0xFEFEFEFF
-//		r3 = LHS ptr - GPR_BYTES (aligned)
-//		r4 = RHS ptr - GPR_BYTES (unaligned)
-//		r5 = length remaining in buffer (may be 0)
-//		r6 = 0x80808080
-
-Laligned:
-        addi	r9,r4,GPR_BYTES     // restore true address of next RHS byte
-        rlwinm	r9,r9,0,0xFFF		// get RHS offset in page
-        subfic	r0,r9,4096			// get #bytes left in RHS page
-        subfc	r7,r0,r5			// ***
-        subfe	r8,r5,r5			// * r9 <- min(r0,r5),
-        and		r7,r7,r8			// * using algorithm in Compiler Writer's Guide
-        add		r9,r0,r7			// ***
-        srgi.	r8,r9,LOG2_GPR_BYTES// get #words or doublewords we can compare
-        beq--	Lcrosspage			// none so advance to next RHS page
-        slgi	r9,r8,LOG2_GPR_BYTES// get #bytes we will be comparing in parallel loop
-        mtctr	r8					// set up loop count
-        sub		r5,r5,r9			// decrement length remaining
-        b		Lwordloop
-        
-// Inner loop: compare a word or doubleword at a time, until one of three conditions:
-//		- a difference is found
-//		- a zero byte is found
-//		- end of count (ie, end of buffer or RHS page, whichever is first)
-// At this point, registers are as follows:
-//		r2 = 0xFEFEFEFF
-//		r3 = LHS ptr - GPR_BYTES (aligned)
-//		r4 = RHS ptr - GPR_BYTES (unaligned)
-//		r5 = length remaining in buffer (may be 0)
-//		r6 = 0x80808080
-//     ctr = count of words or doublewords until end of buffer or RHS page
-
-        .align	5					// align inner loop, which is 8 words long
-Lwordloop:
-        lgu     r7,GPR_BYTES(r3)    // r7 <- next 4 or 8 LHS bytes
-        lgu     r8,GPR_BYTES(r4)    // r8 <- next 4 or 8 RHS bytes
-        add		r10,r7,r2			// r10 <- LHS + 0xFEFEFEFF
-        andc	r12,r6,r7			// r12 <- ~LHS & 0x80808080
-        xor		r11,r7,r8			// r11 <- compare the words
-        and		r9,r10,r12			// r9 <- nonzero iff LHS has a 0-byte
-        or.		r12,r9,r11			// combine difference and 0-test vectors
-        bdnzt	eq,Lwordloop		// loop if ctr!=0 and cr0_eq
-        
-        beq--	Lcrosspage			// skip if buffer or page end reached
-        
-// Found differing bytes and/or a 0-byte.  Determine which comes first, and
-// subtract the bytes to compute the return value.  We also need to mask out the
-// false hits in the 0-byte test, which consist of 0x01 bytes that preceed
-// the 0-byte.
-
-        slgi	r0,r7,7				// move 0x01 bits in LHS into position 0x80
-        andc	r9,r9,r0			// mask out the false 0-hits from 0x01 bytes
-        or		r11,r11,r9			// recompute difference vector
-        cntlzg	r0,r11				// find 1st difference (r0 = 0..31 or 63)
-        rlwinm	r9,r0,0,0x38		// byte align bit offset (r9 = 0,8,16, or 24)
-        addi	r0,r9,8				// now, r0 = 8, 16, 24, or 32
-#if defined(__ppc__)
-        rlwnm	r7,r7,r0,24,31		// right justify differing bytes and mask off rest
-        rlwnm	r8,r8,r0,24,31
-#else
-        rldcl   r7,r7,r0,56         // right justify differing bytes and mask off rest
-        rldcl   r8,r8,r0,56
-#endif
-
-Ldifferent:							// bytes in r7 and r8 differ or are 0
-        sub		r3,r7,r8			// compute return value
-        blr
-