Loading...
--- Libc/Libc-391/ppc/string/strlcat.s
+++ /dev/null
@@ -1,288 +0,0 @@
-/*
- * Copyright (c) 2002 Apple Computer, Inc. All rights reserved.
- *
- * @APPLE_LICENSE_HEADER_START@
- *
- * This file contains Original Code and/or Modifications of Original Code
- * as defined in and that are subject to the Apple Public Source License
- * Version 2.0 (the 'License'). You may not use this file except in
- * compliance with the License. Please obtain a copy of the License at
- * http://www.opensource.apple.com/apsl/ and read it before using this
- * file.
- *
- * The Original Code and all software distributed under the License are
- * distributed on an 'AS IS' basis, WITHOUT WARRANTY OF ANY KIND, EITHER
- * EXPRESS OR IMPLIED, AND APPLE HEREBY DISCLAIMS ALL SUCH WARRANTIES,
- * INCLUDING WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT OR NON-INFRINGEMENT.
- * Please see the License for the specific language governing rights and
- * limitations under the License.
- *
- * @APPLE_LICENSE_HEADER_END@
- */
-#define ASSEMBLER
-#include <mach/ppc/asm.h>
-#undef ASSEMBLER
-
-#define __APPLE_API_PRIVATE
-#include <machine/cpu_capabilities.h>
-#undef __APPLE_API_PRIVATE
-
-/* We use mode-independent "g" opcodes such as "srgi". These expand
- * into word operations when targeting __ppc__, and into doubleword
- * operations when targeting __ppc64__.
- */
-#include <architecture/ppc/mode_independent_asm.h>
-
-
-// *****************
-// * S T R L C A T *
-// *****************
-//
-// size_t strlcat(char *dst, const char *src, size_t count);
-//
-// We optimize the move by doing it word parallel. This introduces
-// a complication: if we blindly did word load/stores until finding
-// a 0, we might get a spurious page fault by touching bytes past it.
-// We are allowed to touch the "count" bytes starting at "dst", but
-// when appending the "src", we must not do a "lwz" that crosses a page
-// boundary, or store past "count".
-//
-// The test for 0s relies on the following inobvious but very efficient
-// word-parallel test:
-// x = dataWord + 0xFEFEFEFF
-// y = ~dataWord & 0x80808080
-// if (x & y) == 0 then no zero found
-// The test maps any non-zero byte to zero, and any zero byte to 0x80,
-// with one exception: 0x01 bytes preceeding the first zero are also
-// mapped to 0x80.
-//
-// Note that "count" is the total buffer length, including the length
-// of the "dst" string. This is different than strncat().
-//
-// In 64-bit mode, this algorithm is doubleword parallel.
-
- .text
- .globl EXT(strlcat)
-
- .align 5
-LEXT(strlcat) // size_t strlcat(char *dst, const char *src, size_t count);
- srgi. r0,r5,LOG2_GPR_BYTES// get #words or doublewords to scan
-#if defined(__ppc__)
- lis r6,hi16(0xFEFEFEFF) // start to generate 32-bit magic constants
- lis r7,hi16(0x80808080)
- ori r6,r6,lo16(0xFEFEFEFF)
- ori r7,r7,lo16(0x80808080)
-#else
- ld r6,_COMM_PAGE_MAGIC_FE(0) // get 0xFEFEFEFE FEFEFEFF from commpage
- ld r7,_COMM_PAGE_MAGIC_80(0) // get 0x80808080 80808080 from commpage
-#endif
- mr r9,r3 // use r9 for dest ptr (r3 remembers dst start)
- beq-- L0bytes // buffer length <4
- mtctr r0 // set up loop
- b L0words // enter word loop
-
-// Loop over words looking for 0.
-// r3 = original start of buffer
-// r4 = source ptr (unaligned)
-// r5 = original buffer size
-// r6 = 0xFEFEFEFF
-// r7 = 0x80808080
-// r9 = dest ptr (unaligned)
-// ctr = #words or doublewords remaining in buffer
-
- .align 5 // align inner loops for speed
-L0words:
- lg r8,0(r9) // r8 <- next dest word or doubleword
- addi r9,r9,GPR_BYTES
- add r10,r8,r6 // r10 <- word + 0xFEFEFEFF
- andc r12,r7,r8 // r12 <- ~word & 0x80808080
- and. r11,r10,r12 // r11 <- nonzero iff word has a 0-byte
- bdnzt eq,L0words // loop until 0 found or buffer end
-
- beq-- L0bytes // skip if 0 not found
-
- slgi r0,r8,7 // move 0x01 bits (false hits) into 0x80 position
- subi r9,r9,GPR_BYTES // back up r9 to the start of the word
- andc r11,r11,r0 // mask out false hits
- cntlzg r0,r11 // find 0 byte (r0 = 0, 8, 16, or 24)
- srwi r0,r0,3 // now r0 = 0, 1, 2, or 3
- add r9,r9,r0 // now r9 points to the 0-byte in dest
- b L0found // start to append source
-
-// Loop over bytes looking for 0.
-// r3 = original start of buffer
-// r4 = source ptr (unaligned)
-// r5 = original buffer size
-// r6 = 0xFEFEFEFF
-// r7 = 0x80808080
-// r9 = dest ptr (unaligned)
-
-L0bytes:
- andi. r0,r5,GPR_BYTES-1 // get #bytes remaining in buffer
- mtctr r0 // set up byte loop
- beq-- L0notfound // skip if 0 not found in buffer (error)
-L0byteloop:
- lbz r8,0(r9) // r8 <- next dest byte
- addi r9,r9,1
- cmpwi r8,0 // 0 ?
- bdnzf eq,L0byteloop // loop until 0 found or buffer end
-
- bne-- L0notfound // skip if 0 not found (error)
- subi r9,r9,1 // back up, so r9 points to the 0
-
-// End of dest found, so we can start appending source. First, align the source,
-// in order to avoid spurious page faults.
-// r3 = original start of buffer
-// r4 = original source ptr (unaligned)
-// r5 = original buffer size
-// r6 = 0xFEFEFEFF
-// r7 = 0x80808080
-// r9 = ptr to 0-byte in dest (unaligned)
-
-L0found:
- andi. r0,r4,GPR_BYTES-1 // is source aligned?
- add r5,r5,r3 // get ptr to end of buffer
- sub r5,r5,r9 // get #bytes remaining in buffer, counting the 0 (r5>0)
- beq Laligned // skip if source already word aligned
- subfic r0,r0,GPR_BYTES // not aligned, get #bytes to align r4
- b Lbyteloop1 // r5!=0, so skip check
-
-// Copy min(r0,r5) bytes, until 0-byte.
-// r0 = #bytes we propose to copy (NOTE: must be >0)
-// r4 = source ptr (unaligned)
-// r5 = length remaining in buffer (may be 0)
-// r6 = 0xFEFEFEFF
-// r7 = 0x80808080
-// r9 = dest ptr (unaligned)
-
-Lbyteloop:
- cmpgi r5,0 // buffer empty? (note: length is unsigned)
- beq-- Loverrun // buffer filled before end of source reached
-Lbyteloop1: // entry when we know r5!=0
- lbz r8,0(r4) // r8 <- next source byte
- subic. r0,r0,1 // decrement count of bytes to move
- addi r4,r4,1
- subi r5,r5,1 // decrement buffer length remaining
- stb r8,0(r9) // pack into dest
- cmpwi cr1,r8,0 // 0-byte?
- addi r9,r9,1
- beq cr1,L0stored // byte was 0, so done
- bne Lbyteloop // r0!=0, source not yet aligned
-
-// Source is aligned. Loop over words or doublewords until 0-byte found or end
-// of buffer.
-// r3 = original start of buffer
-// r4 = source ptr (aligned)
-// r5 = length remaining in buffer
-// r6 = 0xFEFEFEFF
-// r7 = 0x80808080
-// r9 = dest ptr (unaligned)
-
-Laligned:
- srgi. r8,r5,LOG2_GPR_BYTES// get #words or doublewords in buffer
- addi r0,r5,1 // if no words...
- beq-- Lbyteloop // ...copy to end of buffer
- mtctr r8 // set up loop count
- rlwinm r5,r5,0,GPR_BYTES-1 // mask buffer length down to leftover bytes
- b LwordloopEnter
-
-// Inner loop: move a word or doubleword at a time, until one of two conditions:
-// - a zero byte is found
-// - end of buffer
-// At this point, registers are as follows:
-// r3 = original start of buffer
-// r4 = source ptr (aligned)
-// r5 = bytes leftover in buffer (0..GPR_BYTES-1)
-// r6 = 0xFEFEFEFF
-// r7 = 0x80808080
-// r9 = dest ptr (unaligned)
-// ctr = loop count
-
- .align 5 // align inner loop, which is 8 words long
-Lwordloop:
- stg r8,0(r9) // pack word into destination
- addi r9,r9,GPR_BYTES
-LwordloopEnter:
- lg r8,0(r4) // r8 <- next 4 or 8 source bytes
- addi r4,r4,GPR_BYTES
- add r10,r8,r6 // r10 <- word + 0xFEFEFEFF
- andc r12,r7,r8 // r12 <- ~word & 0x80808080
- and. r11,r10,r12 // r11 <- nonzero iff word has a 0-byte
- bdnzt eq,Lwordloop // loop if ctr!=0 and cr0_eq
-
- beq-- Lleftovers // skip if no 0-byte found, copy leftovers
-
-// Found a 0-byte. Store last word up to and including the 0, a byte at a time.
-// r3 = original start of buffer
-// r8 = last word, known to have a 0-byte
-// r9 = dest ptr (one past 0)
-
-Lstorelastbytes:
- srgi. r0,r8,GPR_BYTES*8-8 // right justify next byte and test for 0
- slgi r8,r8,8 // shift next byte into position
- stb r0,0(r9) // pack into dest
- addi r9,r9,1
- bne Lstorelastbytes // loop until 0 stored
-
-// Append op successful, O stored into buffer. Return total length.
-// r3 = original start of buffer
-// r9 = dest ptr (one past 0)
-
-L0stored:
- sub r3,r9,r3 // get (length+1) of string in buffer
- subi r3,r3,1 // return length
- blr
-
-// 0-byte not found in aligned source words. There are up to GPR_BYTES-1 leftover
-// source bytes, hopefully the 0-byte is among them.
-// r4 = source ptr (aligned)
-// r5 = leftover bytes in buffer (0..GPR_BYTES-1)
-// r6 = 0xFEFEFEFF
-// r7 = 0x80808080
-// r8 = last full word or doubleword of source
-// r9 = dest ptr (unaligned)
-
-Lleftovers:
- stg r8,0(r9) // store last word
- addi r9,r9,GPR_BYTES
- addi r0,r5,1 // make sure r5 terminates byte loop (not r0)
- b Lbyteloop
-
-// Buffer filled during append without finding the end of source. Overwrite the
-// last byte in buffer with a 0, and compute how long the concatenated string would
-// have been, if the buffer had been large enough.
-// r3 = original start of buffer
-// r4 = source ptr (1st byte not copied into buffer)
-// r9 = dest ptr (one past end of buffer)
-
-Loverrun:
- sub. r3,r9,r3 // compute #bytes stored in buffer
- li r0,0 // get a 0
- beq-- Lskip // buffer was 0-length
- stb r0,-1(r9) // jam in delimiting 0
-
-// Buffer full, check to see how much longer source is. We don't optimize this,
-// since overruns are an error.
-
-Lskip:
- lbz r8,0(r4) // get next source byte
- addi r4,r4,1
- addi r3,r3,1 // increment length of "ideal" string
- cmpwi r8,0 // 0?
- bne Lskip
-
- subi r3,r3,1 // don't count 0 in length
- blr // return length of string we "wanted" to create
-
-// 0 not found in buffer (append not yet begun.) We don't store a delimiting 0,
-// but do compute how long the concatenated string would have been, assuming the length
-// of "dst" is the length of the buffer.
-// r3 = original start of buffer
-// r4 = original source ptr
-// r9 = dest ptr (one past end of buffer)
-
-L0notfound:
- sub r3,r9,r3 // compute #bytes in buffer
- b Lskip // add strlen(source) to r3
-