Loading...
--- /dev/null
+++ Libc/Libc-391.2.6/ppc/string/strlcpy.s
@@ -0,0 +1,197 @@
+/*
+ * Copyright (c) 2002 Apple Computer, Inc. All rights reserved.
+ *
+ * @APPLE_LICENSE_HEADER_START@
+ *
+ * This file contains Original Code and/or Modifications of Original Code
+ * as defined in and that are subject to the Apple Public Source License
+ * Version 2.0 (the 'License'). You may not use this file except in
+ * compliance with the License. Please obtain a copy of the License at
+ * http://www.opensource.apple.com/apsl/ and read it before using this
+ * file.
+ *
+ * The Original Code and all software distributed under the License are
+ * distributed on an 'AS IS' basis, WITHOUT WARRANTY OF ANY KIND, EITHER
+ * EXPRESS OR IMPLIED, AND APPLE HEREBY DISCLAIMS ALL SUCH WARRANTIES,
+ * INCLUDING WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT OR NON-INFRINGEMENT.
+ * Please see the License for the specific language governing rights and
+ * limitations under the License.
+ *
+ * @APPLE_LICENSE_HEADER_END@
+ */
+#define ASSEMBLER
+#include <mach/ppc/asm.h>
+#undef ASSEMBLER
+
+#define __APPLE_API_PRIVATE
+#include <machine/cpu_capabilities.h>
+#undef __APPLE_API_PRIVATE
+
+/* We use mode-independent "g" opcodes such as "srgi". These expand
+ * into word operations when targeting __ppc__, and into doubleword
+ * operations when targeting __ppc64__.
+ */
+#include <architecture/ppc/mode_independent_asm.h>
+
+
+// *****************
+// * S T R L C P Y *
+// *****************
+//
+// size_t strlcpy(char *dst, const char *src, size_t size);
+//
+// We optimize the move by doing it word parallel. This introduces
+// a complication: if we blindly did word load/stores until finding
+// a 0, we might get a spurious page fault by touching bytes past it.
+// To avoid this, we never do a "lwz" that crosses a page boundary,
+// or store unnecessary bytes.
+//
+// The test for 0s relies on the following inobvious but very efficient
+// word-parallel test:
+// x = dataWord + 0xFEFEFEFF
+// y = ~dataWord & 0x80808080
+// if (x & y) == 0 then no zero found
+// The test maps any non-zero byte to zero, and any zero byte to 0x80,
+// with one exception: 0x01 bytes preceeding the first zero are also
+// mapped to 0x80.
+//
+// This algorithm is doubleword parallel in 64-bit mode.
+
+ .text
+ .globl EXT(strlcpy)
+
+ .align 5
+LEXT(strlcpy) // size_t strlcpy(char *dst, const char *src, size_t size);
+ andi. r0,r4,GPR_BYTES-1 // is source aligned?
+#if defined(__ppc__)
+ lis r6,hi16(0xFEFEFEFF) // start to generate 32-bit magic constants
+ lis r7,hi16(0x80808080)
+ ori r6,r6,lo16(0xFEFEFEFF)
+ ori r7,r7,lo16(0x80808080)
+#else
+ ld r6,_COMM_PAGE_MAGIC_FE(0) // get 0xFEFEFEFE FEFEFEFF from commpage
+ ld r7,_COMM_PAGE_MAGIC_80(0) // get 0x80808080 80808080 from commpage
+#endif
+ mr r9,r3 // use r9 for dest ptr (must return r3 intact)
+ beq Laligned // source is aligned
+ subfic r0,r0,GPR_BYTES // r0 <- #bytes to align source
+
+// Copy min(r0,r5) bytes, until 0-byte found.
+// r0 = #bytes we propose to copy (NOTE: must be >0)
+// r4 = source ptr (unaligned)
+// r5 = length remaining in buffer (may be 0)
+// r6 = 0xFEFEFEFF
+// r7 = 0x80808080
+// r9 = dest ptr (unaligned)
+
+Lbyteloop:
+ cmpwi r5,0 // buffer empty?
+ beq-- L0notfound // buffer full but 0 not found
+ lbz r8,0(r4) // r8 <- next source byte
+ subic. r0,r0,1 // decrement count of bytes to move
+ addi r4,r4,1
+ subi r5,r5,1 // decrement buffer length remaining
+ stb r8,0(r9) // pack into dest
+ cmpwi cr1,r8,0 // 0-byte?
+ addi r9,r9,1
+ beq cr1,L0found // byte was 0
+ bne Lbyteloop // r0!=0, source not yet aligned
+
+// Source is aligned. Loop over words or doublewords until end of buffer. We
+// align the source, rather than the dest, to avoid getting spurious page faults.
+// r4 = source ptr (aligned)
+// r5 = length remaining in buffer
+// r6 = 0xFEFEFEFF
+// r7 = 0x80808080
+// r9 = dest ptr (unaligned)
+
+Laligned:
+ srgi. r8,r5,LOG2_GPR_BYTES// get #words or doublewords in buffer
+ addi r0,r5,1 // if no words, compare rest of buffer
+ beq-- Lbyteloop // r8==0, no words
+ mtctr r8 // set up word loop count
+ rlwinm r5,r5,0,GPR_BYTES-1 // mask buffer length down to leftover bytes
+ b LwordloopEnter
+
+// Move a word or doubleword at a time, until one of two conditions:
+// - a zero byte is found
+// - end of buffer
+// At this point, registers are as follows:
+// r4 = source ptr (aligned)
+// r5 = leftover bytes in buffer (0..GPR_BYTES-1)
+// r6 = 0xFEFEFEFF
+// r7 = 0x80808080
+// r9 = dest ptr (unaligned)
+// ctr = whole words or doublewords left in buffer
+
+ .align 5 // align inner loop, which is 8 words long
+Lwordloop:
+ stg r8,0(r9) // pack word or doubleword into destination
+ addi r9,r9,GPR_BYTES
+LwordloopEnter:
+ lg r8,0(r4) // r8 <- next 4 or 8 source bytes
+ addi r4,r4,GPR_BYTES
+ add r10,r8,r6 // r10 <- word + 0xFEFEFEFF
+ andc r12,r7,r8 // r12 <- ~word & 0x80808080
+ and. r11,r10,r12 // r11 <- nonzero iff word has a 0-byte
+ bdnzt eq,Lwordloop // loop if ctr!=0 and cr0_eq
+
+ beq Lleftovers // 0-byte not found in aligned words
+
+// Found a 0-byte. Store last word up to and including the 0, a byte at a time.
+// r8 = last word or doubleword, known to have a 0-byte
+// r9 = dest ptr
+
+Lstorelastbytes:
+ srgi. r0,r8,GPR_BYTES*8-8 // right justify next byte and test for 0
+ slgi r8,r8,8 // shift next byte into position
+ stb r0,0(r9) // pack into dest
+ addi r9,r9,1
+ bne Lstorelastbytes // loop until 0 stored
+
+L0found:
+ sub r3,r9,r3 // get #bytes stored, including 0
+ subi r3,r3,1 // don't count the 0
+ blr // return strlen(src)
+
+// 0-byte not found in aligned source words. There are up to GPR_BYTES-1 leftover
+// source bytes, hopefully the 0-byte is among them.
+// r4 = source ptr (aligned)
+// r5 = leftover bytes in buffer (0..GPR_BYTES-1)
+// r6 = 0xFEFEFEFF
+// r7 = 0x80808080
+// r8 = last full word or doubleword of source
+// r9 = dest ptr (unaligned)
+
+Lleftovers:
+ stg r8,0(r9) // store last word or doubleword
+ addi r9,r9,GPR_BYTES
+ addi r0,r5,1 // make sure r5 terminates byte loop (not r0)
+ b Lbyteloop
+
+// Buffer full but 0-byte not found. Stuff a 0 into last byte of buffer.
+// r3 = start of buffer
+// r4 = ptr to next byte in source
+// r9 = ptr to first byte past end of buffer
+
+L0notfound:
+ sub. r3,r9,r3 // get #bytes stored, ie original buffer length
+ beq Lfind0 // skip if buffer 0-length
+ li r0,0 // get a 0
+ stb r0,-1(r9) // always store 0-byte unless buffer was 0-length
+
+// Keep searching for 0-byte ending source, so we can return strlen(source).
+// Not optimized, since this is an error condition.
+// r3 = number of bytes already copied
+// r4 = ptr to next byte in source
+
+Lfind0:
+ lbz r0,0(r4) // get next byte
+ addi r4,r4,1
+ addi r3,r3,1 // increment strlen
+ cmpwi r0,0
+ bne Lfind0 // loop if not 0
+
+ subi r3,r3,1 // don't count the 0-byte
+ blr // return strlen(source)