Loading...
--- xnu/xnu-792.13.8/kgmacros
+++ xnu/xnu-792.17.14/kgmacros
@@ -6,8 +6,26 @@
#
# All the convenience variables used by these macros begin with $kgm_
-set print asm-demangle on
-set cp-abi gnu-v2
+define showversion
+#Display version string, a pointer to which is pinned at 0x501C in the kernel's
+#low memory globals
+ p (char *) *0x501c
+end
+
+document showversion
+Syntax: showversion
+| Read the kernel version string from a fixed address in low
+| memory. Useful if you don't know which kernel is on the other end,
+| and need to find the appropriate symbols. Beware that if you've
+| loaded a symbol file, but aren't connected to a remote target,
+| the version string from the symbol file will be displayed instead.
+| This macro expects to be connected to the remote kernel to function
+| correctly.
+end
+
+set $kgm_dummy = &proc0
+set $kgm_dummy = &kmod
+set $kgm_mtype = ((struct mach_header)_mh_execute_header).cputype
echo Loading Kernel GDB Macros package. Type "help kgm" for more info.\n
@@ -36,13 +54,7 @@
| showallipc Display a summary listing of all the ipc spaces
| showallrights Display a summary listing of all the ipc rights
| showallkmods Display a summary listing of all the kernel modules
-|
-| showallclasses Display info about all OSObject subclasses in the system
-| showobject Show info about an OSObject - its vtable ptr and retain count, & more info for simple container classes.
-| showregistry Show info about all registry entries in the current plane
-| showregistryprops Show info about all registry entries in the current plane, and their properties
-| showregistryentry Show info about a registry entry; its properties and descendants in the current plane
-| setregistryplane Set the plane to be used for the iokit registry macros (pass zero for list)
+| showallclasses Display info about all OSObject subclasses in the system
|
| showtask Display info about the specified task
| showtaskthreads Display info about the threads in the task
@@ -92,45 +104,13 @@
| disablecore Configure the kernel to disable coredump transmission
| switchtocorethread Corefile version of "switchtoact"
| resetcorectx Corefile version of "resetctx"
-|
-| readphys Reads the specified untranslated address
-| readphys64 Reads the specified untranslated 64-bit address
-|
+|
| kdp-reboot Restart remote target
|
| Type "help <macro>" for more specific help on a particular macro.
| Type "show user <macro>" to see what the macro is really doing.
end
-# This macro should appear before any symbol references, to facilitate
-# a gdb "source" without a loaded symbol file.
-define showversion
- printf "%s\n", *(char **)0x501C
-end
-
-document showversion
-Syntax: showversion
-| Read the kernel version string from a fixed address in low
-| memory. Useful if you don't know which kernel is on the other end,
-| and need to find the appropriate symbols. Beware that if you've
-| loaded a symbol file, but aren't connected to a remote target,
-| the version string from the symbol file will be displayed instead.
-| This macro expects to be connected to the remote kernel to function
-| correctly.
-end
-
-set $kgm_dummy = &proc0
-set $kgm_dummy = &kmod
-set $kgm_mtype = ((struct mach_header)_mh_execute_header).cputype
-
-set $kgm_reg_depth = 0
-set $kgm_reg_plane = (void **) gIOServicePlane
-set $kgm_namekey = (OSSymbol *) 0
-set $kgm_childkey = (OSSymbol *) 0
-
-set $kgm_show_object_addrs = 0
-set $kgm_show_object_retain = 0
-set $kgm_show_props = 0
define showkmodheader
printf "kmod address size "
@@ -155,7 +135,7 @@
set $kgm_pkmod = 0
set $kgm_pkmodst = 0
set $kgm_pkmoden = 0
-define showkmodaddrint
+define showkmodaddr
printf "0x%x" , $arg0
if ((unsigned int)$arg0 >= (unsigned int)$kgm_pkmodst) && ((unsigned int)$arg0 <= (unsigned int)$kgm_pkmoden)
set $kgm_off = ((unsigned int)$arg0 - (unsigned int)$kgm_pkmodst)
@@ -169,7 +149,7 @@
set $kgm_kmodmin = $kgm_kmod.address
end
if ($kgm_kmod.address + $kgm_kmod.size) > $kgm_kmodmax
- set $kgm_kmodmax = $kgm_kmod.address + $kgm_kmod.size
+ set $kgm_kmodmax = $kgm_kmod.address
end
set $kgm_off = ((unsigned int)$arg0 - (unsigned int)$kgm_kmod.address)
if ($kgm_kmod.address <= $arg0) && ($kgm_off <= $kgm_kmod.size)
@@ -189,12 +169,6 @@
end
end
end
-
-define showkmodaddr
- showkmodaddrint $arg0
- printf "\n"
-end
-
document showkmodaddr
| Given an address, print the offset and name for the kmod containing it
| The following is the syntax:
@@ -261,10 +235,10 @@
if $kgm_state & 0x01
printf "W\t"
printf "0x%08x ", $kgm_thread.wait_queue
- if (((unsigned)$kgm_thread.wait_event > (unsigned)sectPRELINKB) \
- && ($arg1 != 2))
- showkmodaddr $kgm_thread.wait_event
- else
+
+ if ((unsigned)$kgm_thread.wait_event > (unsigned)sectPRELINKB)
+ showkmodaddr $kgm_thread.wait_event
+ else
output /a (unsigned) $kgm_thread.wait_event
end
end
@@ -277,45 +251,37 @@
if ($kgm_mtype == 18)
set $mysp = $kgm_thread.machine.pcb->save_r1
else
- set $kgm_statep = (struct x86_kernel_state32 *) \
+ set $kgm_statep = (struct i386_kernel_state *) \
($kgm_thread->kernel_stack + 0x4000 \
- - sizeof(struct x86_kernel_state32))
+ - sizeof(struct i386_kernel_state))
set $mysp = $kgm_statep->k_ebp
end
- set $prevsp = $mysp - 16
+ set $prevsp = 0
printf "\n\t\tstacktop=0x%08x", $mysp
if ($kgm_mtype == 18)
set $stkmask = 0xf
+ set $stklimit = 0xb0000000
else
set $stkmask = 0x3
+ set $stklimit = 0xfc000000
end
- set $kgm_return = 0
while ($mysp != 0) && (($mysp & $stkmask) == 0) \
- && ($mysp != $prevsp) \
- && ((((unsigned) $mysp ^ (unsigned) $prevsp) < 0x2000) \
- || (((unsigned)$mysp < ((unsigned) ($kgm_thread->kernel_stack+0x4000))) \
- && ((unsigned)$mysp > (unsigned) ($kgm_thread->kernel_stack))))
-
- if ((unsigned) $kgm_return > (unsigned) sectPRELINKB)
- showkmodaddr $kgm_return
- else
- if ((unsigned) $kgm_return > 0)
- output /a (unsigned) $kgm_return
- end
- end
+ && ($mysp < $stklimit) \
+ && ((unsigned)$mysp > (unsigned)$prevsp)
printf "\n\t\t0x%08x ", $mysp
if ($kgm_mtype == 18)
set $kgm_return = *($mysp + 8)
else
set $kgm_return = *($mysp + 4)
end
+ if ((unsigned) $kgm_return > (unsigned) sectPRELINKB)
+ showkmodaddr $kgm_return
+ else
+ output /a (unsigned) $kgm_return
+ end
set $prevsp = $mysp
set $mysp = * $mysp
end
- if ((unsigned) $kgm_return > 0)
- output/a $kgm_return
- end
- set $kgm_return = 0
printf "\n\t\tstackbottom=0x%08x", $prevsp
else
printf "\n\t\t\tcontinuation="
@@ -392,7 +358,6 @@
| (gdb) showcurrentthreads
end
-set $decode_wait_events = 0
define showallstacks
set $kgm_head_taskp = &default_pset.tasks
set $kgm_taskp = (struct task *)($kgm_head_taskp->next)
@@ -403,25 +368,17 @@
set $kgm_actp = (struct thread *)($kgm_taskp->threads.next)
while $kgm_actp != $kgm_head_actp
showactheader
- if ($decode_wait_events > 0)
- showactint $kgm_actp 1
- else
- showactint $kgm_actp 2
- end
+ showactint $kgm_actp 1
set $kgm_actp = (struct thread *)($kgm_actp->task_threads.next)
end
printf "\n"
set $kgm_taskp = (struct task *)($kgm_taskp->pset_tasks.next)
end
end
-
document showallstacks
| Routine to print out the stack for each thread in the system.
| The following is the syntax:
| (gdb) showallstacks
-| If the variable $decode_wait_events is non-zero, the routine attempts to
-| interpret thread wait_events as kernel module offsets, which can add to
-| processing time.
end
define showcurrentstacks
@@ -438,7 +395,6 @@
set $kgm_prp = ($kgm_prp)->processor_list
end
end
-
document showcurrentstacks
| Routine to print out the thread running on each cpu (incl. its stack)
| The following is the syntax:
@@ -1470,44 +1426,25 @@
set $kdp_act_counter = 0
define switchtoact
- set $newact = (struct thread *) $arg0
- if ($newact->kernel_stack == 0)
- echo This activation does not have a stack.\n
- echo continuation:
- output/a (unsigned) $newact.continuation
- echo \n
- else
if ($kgm_mtype == 18)
if ($kdp_act_counter == 0)
- set $kdpstate = (struct savearea *) kdp.saved_state
+ set $kdpstate = (struct savearea *) kdp.saved_state
end
set $kdp_act_counter = $kdp_act_counter + 1
set $newact = (struct thread *) $arg0
- set (struct savearea *) kdp.saved_state=$newact->machine->pcb
- flushregs
- flushstack
- set $pc=$newact->machine->pcb.save_srr0
- update
+ if ($newact->kernel_stack == 0)
+ echo This activation does not have a stack.\n
+ echo continuation:
+ output/a (unsigned) $newact.continuation
+ echo \n
+ else
+ set (struct savearea *) kdp.saved_state=$newact->machine->pcb
+ flush
+ set $pc=$newact->machine->pcb.save_srr0
+ update
+ end
else
- set $kdpstatep = (struct x86_saved_state32 *) kdp.saved_state
- if ($kdp_act_counter == 0)
- set $kdpstate = *($kdpstatep)
- end
- set $kdp_act_counter = $kdp_act_counter + 1
-
- set $kgm_statep = (struct x86_kernel_state32 *) \
- ($newact->kernel_stack + 0x4000 \
- - sizeof(struct x86_kernel_state32))
- set $kdpstatep->ebx = $kgm_statep->k_ebx
- set $kdpstatep->ebp = $kgm_statep->k_ebp
- set $kdpstatep->edi = $kgm_statep->k_edi
- set $kdpstatep->esi = $kgm_statep->k_esi
- set $kdpstatep->eip = $kgm_statep->k_eip
- flushregs
- flushstack
- set $pc = $kgm_statep->k_eip
- update
- end
+ echo switchtoact not implemented for this architecture.\n
end
end
@@ -1527,8 +1464,7 @@
end
set $kdp_act_counter = $kdp_act_counter + 1
set (struct savearea *) kdp.saved_state=(struct savearea *) $arg0
- flushregs
- flushstack
+ flush
set $pc=((struct savearea *) $arg0)->save_srr0
update
else
@@ -1547,19 +1483,12 @@
define resetctx
if ($kgm_mtype == 18)
set (struct savearea *)kdp.saved_state=$kdpstate
- flushregs
- flushstack
+ flush
set $pc=((struct savearea *) kdp.saved_state)->save_srr0
update
set $kdp_act_counter = 0
else
- set $kdpstatep = (struct x86_saved_state32 *) kdp.saved_state
- set *($kdpstatep)=$kdpstate
- flushregs
- flushstack
- set $pc=$kdpstatep->eip
- update
- set $kdp_act_counter = 0
+ echo resetctx not implemented for this architecture.\n
end
end
@@ -1671,8 +1600,7 @@
define _kgm_flush_loop
set $kgm_flush_loop_ctr = 0
while ($kgm_flush_loop_ctr < 30)
- flushregs
- flushstack
+ flush
set $kgm_flush_loop_ctr = $kgm_flush_loop_ctr + 1
end
end
@@ -1683,41 +1611,6 @@
update
set $kgm_update_loop_ctr = $kgm_update_loop_ctr + 1
end
-end
-
-#This is necessary since gdb often doesn't do backtraces on x86 correctly
-#in the absence of symbols.The code below in showuserstack and
-#showx86backtrace also contains several workarouds for the gdb bug where
-#gdb stops macro evaluation because of spurious "Cannot read memory"
-#errors on x86. These errors appear on ppc as well, but they don't
-#always stop macro evaluation.
-
-set $kgm_cur_ebp = 0
-set $kgm_cur_eip = 0
-
-define showx86backtrace
- if ($kgm_cur_ebp == 0)
- set $kgm_cur_ebp = $ebp
- end
- if ($kgm_cur_eip == 0)
- set $kgm_cur_eip = $eip
- end
- printf "0: EBP: 0x%08x EIP: 0x%08x\n", $kgm_cur_ebp, $kgm_cur_eip
- x/i $kgm_cur_eip
- set $kgm_prev_ebp = *((uint32_t *) $kgm_cur_ebp)
- set $kgm_prev_eip = *((uint32_t *) ($kgm_cur_ebp + 4))
- set $kgm_frameno = 1
- while $kgm_prev_ebp != 0
- printf "%d: saved EBP: 0x%08x saved EIP: 0x%08x\n", $kgm_frameno, $kgm_prev_ebp, $kgm_prev_eip
- x/i $kgm_prev_eip
- set $kgm_cur_ebp = $kgm_prev_ebp
- set $kgm_prev_ebp = *((uint32_t *) $kgm_cur_ebp)
- set $kgm_prev_eip = *((uint32_t *) ($kgm_cur_ebp + 4))
- set $kgm_frameno = $kgm_frameno + 1
- end
- set $kgm_cur_ebp = 0
- set $kgm_cur_eip = 0
- set kdp_pmap = 0
end
define showuserstack
@@ -1751,22 +1644,10 @@
_kgm_update_loop
end
else
- set $newact = (struct thread *) $arg0
- set $newiss = (x86_saved_state32_t *) ($newact->machine.pcb->iss)
- set $checkpc = $newiss.eip
- if ($checkpc == 0)
- echo This activation does not appear to have
- echo \20 a valid user context.\n
- else
- set $kgm_cur_ebp = $newiss.ebp
- set $kgm_cur_eip = $checkpc
- printf "You may now issue the showx86backtrace command to see the user space backtrace for this thread (0x%08x); you can also examine memory locations in this address space (pmap 0x%08x) before issuing the backtrace. This two-step process is necessary to work around various bugs in x86 gdb, which cause it to stop memory evaluation on spurious memory read errors. Additionally, you may need to issue a set kdp_pmap = 0 command after the showx86backtrace completes, to resume reading from the kernel address space.\n", $arg0, $newact->task->map->pmap
- set kdp_pmap = $newact->task->map->pmap
- _kgm_flush_loop
- _kgm_update_loop
- end
- end
-end
+ echo showuserstack not implemented for this architecture.\n
+ end
+end
+
document showuserstack
Syntax: showuserstack <address of thread activation>
|This command displays a numeric backtrace for the user space stack of
@@ -1962,9 +1843,9 @@
if ($kgm_mtype == 18)
set $mysp = $kgm_thread.machine.pcb->save_r1
else
- set $kgm_statep = (struct x86_kernel_state32 *) \
+ set $kgm_statep = (struct i386_kernel_state *) \
($kgm_thread->kernel_stack + 0x4000 \
- - sizeof(struct x86_kernel_state32))
+ - sizeof(struct i386_kernel_state))
set $mysp = $kgm_statep->k_ebp
end
set $prevsp = 0
@@ -2074,429 +1955,22 @@
end
define showmetaclass
+ set cp-abi gnu-v2
set $kgm_metaclassp = (OSMetaClass *)$arg0
printf "%-5d", $kgm_metaclassp->instanceCount
printf "x %5d bytes", $kgm_metaclassp->classSize
printf " %s\n", $kgm_metaclassp->className->string
end
-define showstring
- printf "\"%s\"", ((OSString *)$arg0)->string
-end
-
-define shownumber
- printf "%lld", ((OSNumber *)$arg0)->value
-end
-
-define showboolean
- if ($arg0 == gOSBooleanFalse)
- printf "No"
- else
- printf "Yes"
- end
-end
-
-define showdata
- set $kgm_data = (OSData *)$arg0
-
- printf "<"
- set $kgm_datap = (const unsigned char *) $kgm_data->data
-
- set $kgm_printstr = 0
- if (0 == (3 & (unsigned int)$kgm_datap) && ($kgm_data->length >= 3))
- set $kgm_bytes = *(unsigned int *) $kgm_datap
- if (0xffff0000 & $kgm_bytes)
- set $kgm_idx = 0
- set $kgm_printstr = 1
- while ($kgm_idx++ < 4)
- set $kgm_bytes = $kgm_bytes >> 8
- set $kgm_char = 0xff & $kgm_bytes
- if ($kgm_char && (($kgm_char < 0x20) || ($kgm_char > 0x7e)))
- set $kgm_printstr = 0
- end
- end
- end
- end
-
- set $kgm_idx = 0
- if ($kgm_printstr)
- set $kgm_quoted = 0
- while ($kgm_idx < $kgm_data->length)
- set $kgm_char = $kgm_datap[$kgm_idx++]
- if ($kgm_char)
- if (0 == $kgm_quoted)
- set $kgm_quoted = 1
- if ($kgm_idx > 1)
- printf ",\""
- else
- printf "\""
- end
- end
- printf "%c", $kgm_char
- else
- if ($kgm_quoted)
- set $kgm_quoted = 0
- printf "\""
- end
- end
- end
- if ($kgm_quoted)
- printf "\""
- end
- else
- if (0 == (3 & (unsigned int)$kgm_datap))
- while (($kgm_idx + 3) <= $kgm_data->length)
- printf "%08x", *(unsigned int *) &$kgm_datap[$kgm_idx]
- set $kgm_idx = $kgm_idx + 4
- end
- end
- while ($kgm_idx < $kgm_data->length)
- printf "%02x", $kgm_datap[$kgm_idx++]
- end
- end
- printf ">"
-end
-
-define showdictionaryint
- set $kgm$arg0_dict = (OSDictionary *)$arg1
-
- printf "{"
- set $kgm$arg0_idx = 0
- while ($kgm$arg0_idx < $kgm$arg0_dict->count)
- set $kgm_obj = $kgm$arg0_dict->dictionary[$kgm$arg0_idx].key
- showobjectint _$arg0 $kgm_obj
- printf "="
- set $kgm_obj = $kgm$arg0_dict->dictionary[$kgm$arg0_idx++].value
- showobjectint _$arg0 $kgm_obj
- if ($kgm$arg0_idx < $kgm$arg0_dict->count)
- printf ","
- end
- end
- printf "}"
-end
-
-define indent
- set $kgm_idx = 0
- while ($kgm_idx < $arg0)
- if ($arg1 & (1 << $kgm_idx++))
- printf "| "
- else
- printf " "
- end
- end
-end
-
-define showregdictionary
- indent $kgm_reg_depth+2 $arg1
- printf "{\n"
-
- set $kgm_reg_idx = 0
- while ($kgm_reg_idx < $arg0->count)
- indent $kgm_reg_depth+2 $arg1
- printf " "
- set $kgm_obj = $arg0->dictionary[$kgm_reg_idx].key
- showobjectint _ $kgm_obj
- printf " = "
-
- set $kgm_obj = $arg0->dictionary[$kgm_reg_idx++].value
- showobjectint _ $kgm_obj
- printf "\n"
- end
- indent $kgm_reg_depth+2 $arg1
- printf "}\n"
-end
-
-
-define showarraysetint
- set $kgm$arg0_array = (OSArray *)$arg1
-
- set $kgm$arg0_idx = 0
- while ($kgm$arg0_idx < $kgm$arg0_array->count)
- set $kgm_obj = $kgm$arg0_array->array[$kgm$arg0_idx++]
- showobjectint _$arg0 $kgm_obj
- if ($kgm$arg0_idx < $kgm$arg0_array->count)
- printf ","
- end
- end
-end
-
-define showarrayint
- printf "("
- showarraysetint $arg0 $arg1
- printf ")"
-end
-
-define showsetint
- set $kgm_array = ((OSSet *)$arg1)->members
- printf "["
- showarraysetint $arg0 $kgm_array
- printf "]"
-end
-
-
-define showobjectint
- set $kgm_obj = (OSObject *) $arg1
- set $kgm_vt = *((void **) $arg1)
-
- if ($kgm_show_object_addrs)
- printf "`object %p, vt ", $arg1
- output /a (unsigned) $kgm_vt
- if ($kgm_show_object_retain)
- printf ", retain count %d, container retain %d", (0xffff & $kgm_obj->retainCount), $kgm_obj->retainCount >> 16
- end
- printf "` "
- end
-
- if ($kgm_vt == _ZTV8OSString)
- showstring $arg1
- else
- if ($kgm_vt == _ZTV8OSSymbol)
- showstring $arg1
- else
- if ($kgm_vt == _ZTV8OSNumber)
- shownumber $arg1
- else
- if ($kgm_vt == _ZTV6OSData)
- showdata $arg1
- else
- if ($kgm_vt == _ZTV9OSBoolean)
- showboolean $arg1
- else
- if ($kgm_vt == _ZTV12OSDictionary)
- showdictionaryint _$arg0 $arg1
- else
- if ($kgm_vt == _ZTV7OSArray)
- showarrayint _$arg0 $arg1
- else
- if ($kgm_vt == _ZTV5OSSet)
- showsetint _$arg0 $arg1
- else
- if ($kgm_show_object_addrs == 0)
- printf "`object %p, vt ", $arg1
- output /a (unsigned) $kgm_vt
- printf "`"
- end
- end
- end
- end
- end
- end
- end
- end
- end
-end
-
-define showobject
- set $kgm_save = $kgm_show_object_addrs
- set $kgm_show_object_addrs = 1
- set $kgm_show_object_retain = 1
- showobjectint _ $arg0
- set $kgm_show_object_addrs = $kgm_save
- set $kgm_show_object_retain = 0
- printf "\n"
-end
-document showobject
-| Show info about an OSObject - its vtable ptr and retain count.
-| If the object is a simple container class, more info will be shown.
-| The following is the syntax:
-| (gdb) showobject <object address>
-end
-
-define dictget
- set $kgm_dictp = (OSDictionary *)$arg0
- set $kgm_keyp = (const OSSymbol *)$arg1
- set $kgm_idx = 0
- set $kgm_result = 0
- while (($kgm_idx < $kgm_dictp->count) && ($kgm_result == 0))
- if ($kgm_keyp == $kgm_dictp->dictionary[$kgm_idx].key)
- set $kgm_result = $kgm_dictp->dictionary[$kgm_idx].value
- end
- set $kgm_idx = $kgm_idx + 1
- end
-end
-
-
-define showregistryentryrecurse
- set $kgm_re = (IOService *)$arg1
- set $kgm$arg0_stack = (unsigned long long) $arg2
-
- if ($arg3)
- set $kgm$arg0_stack = $kgm$arg0_stack | (1ULL << $kgm_reg_depth)
- else
- set $kgm$arg0_stack = $kgm$arg0_stack & ~(1ULL << $kgm_reg_depth)
- end
-
- dictget $kgm_re->fRegistryTable $kgm_childkey
- set $kgm$arg0_child_array = (OSArray *) $kgm_result
-
- if ($kgm$arg0_child_array)
- set $kgm$arg0_child_count = $kgm$arg0_child_array->count
- else
- set $kgm$arg0_child_count = 0
- end
-
- if ($kgm$arg0_child_count)
- set $kgm$arg0_stack = $kgm$arg0_stack | (2ULL << $kgm_reg_depth)
- else
- set $kgm$arg0_stack = $kgm$arg0_stack & ~(2ULL << $kgm_reg_depth)
- end
-
- indent $kgm_reg_depth $kgm$arg0_stack
- printf "+-o "
-
- dictget $kgm_re->fRegistryTable $kgm_namekey
- if ($kgm_result == 0)
- dictget $kgm_re->fRegistryTable gIONameKey
- end
- if ($kgm_result == 0)
- dictget $kgm_re->fPropertyTable gIOClassKey
- end
-
- if ($kgm_result != 0)
- printf "%s", ((OSString *)$kgm_result)->string
- else
- if (((IOService*)$kgm_re)->pm_vars && ((IOService*)$kgm_re)->pm_vars->ourName)
- printf "%s", ((IOService*)$kgm_re)->pm_vars->ourName
- else
-# printf ", guessclass "
-# guessclass $kgm_re
- printf "??"
- end
- end
-
-
- printf " <object %p, ", $kgm_re
- printf "vtable "
- set $kgm_vt = (unsigned) *(void**) $kgm_re
- output /a $kgm_vt
-
- if ($kgm_vt != _ZTV15IORegistryEntry)
- printf ", "
- set $kgm_state = $kgm_re->__state[0]
- # kIOServiceRegisteredState
- if (0 == ($kgm_state & 2))
- printf "!"
- end
- printf "registered, "
- # kIOServiceMatchedState
- if (0 == ($kgm_state & 4))
- printf "!"
- end
- printf "matched, "
- # kIOServiceInactiveState
- if ($kgm_state & 1)
- printf "in"
- end
- printf "active, busy %d, retain count %d", (0xff & $kgm_re->__state[1]), (0xffff & $kgm_re->retainCount)
- end
- printf ">\n"
-
- if ($kgm_show_props)
- set $kgm_props = $kgm_re->fPropertyTable
- showregdictionary $kgm_props $kgm$arg0_stack
- end
-
- # recurse
- if ($kgm$arg0_child_count != 0)
-
- set $kgm_reg_depth = $kgm_reg_depth + 1
- set $kgm$arg0_child_idx = 0
-
- while ($kgm$arg0_child_idx < $kgm$arg0_child_count)
- set $kgm_re = $kgm$arg0_child_array->array[$kgm$arg0_child_idx++]
- set $kgm_more_sib = ($kgm$arg0_child_idx < $kgm$arg0_child_count)
- showregistryentryrecurse _$arg0 $kgm_re $kgm$arg0_stack $kgm_more_sib
- end
-
- set $kgm_reg_depth = $kgm_reg_depth - 1
- end
-end
-
-define showregistryentryint
- set $kgm_namekey = (OSSymbol *) $kgm_reg_plane[2]
- set $kgm_childkey = (OSSymbol *) $kgm_reg_plane[4]
-
- showregistryentryrecurse _ $arg0 0 0
-end
-
-define showregistry
- set $kgm_reg_depth = 0
- set $kgm_show_props = 0
- showregistryentryint gRegistryRoot
-end
-document showregistry
-| Show info about all registry entries in the current plane.
-| The following is the syntax:
-| (gdb) showregistry
-end
-
-define showregistryprops
- set $kgm_reg_depth = 0
- set $kgm_show_props = 1
- showregistryentryint gRegistryRoot
-end
-document showregistryprops
-| Show info about all registry entries in the current plane, and their properties.
-| set $kgm_show_object_addrs = 1 and/or set $kgm_show_object_retain = 1 will display
-| more verbose information
-| The following is the syntax:
-| (gdb) showregistryprops
-end
-
-define showregistryentry
- set $kgm_reg_depth = 0
- set $kgm_show_props = 1
- showregistryentryint $arg0
-end
-document showregistryentry
-| Show info about a registry entry; its properties and descendants in the current plane.
-| The following is the syntax:
-| (gdb) showregistryentry <object address>
-end
-
-define setregistryplane
- if ($arg0)
- set $kgm_reg_plane = (void **) $arg0
- else
- showobjectint _ gIORegistryPlanes
- printf "\n"
- end
-end
-document setregistryplane
-| Set the plane to be used for the iokit registry macros. An argument of zero will
-| display known planes.
-| The following is the syntax:
-| (gdb) setregistryplane <plane object address>
-end
-
-define guessclass
+define showallclasses
+ set cp-abi gnu-v2
set $kgm_classidx = 0
- set $kgm_lookvt = *((void **) $arg0)
- set $kgm_bestvt = (void *) 0
- set $kgm_bestidx = 0
-
while $kgm_classidx < sAllClassesDict->count
set $kgm_meta = (OSMetaClass *) sAllClassesDict->dictionary[$kgm_classidx].value
-
- set $kgm_vt = *((void **) $kgm_meta)
-
- if (($kgm_vt > $kgm_bestvt) && ($kgm_vt < $kgm_lookvt))
- set $kgm_bestvt = $kgm_vt
- set $kgm_bestidx = $kgm_classidx
- end
+ showmetaclass $kgm_meta
set $kgm_classidx = $kgm_classidx + 1
end
- printf "%s", sAllClassesDict->dictionary[$kgm_bestidx].key->string
-end
-
-define showallclasses
- set $kgm_classidx = 0
- while $kgm_classidx < sAllClassesDict->count
- set $kgm_meta = (OSMetaClass *) sAllClassesDict->dictionary[$kgm_classidx++].value
- showmetaclass $kgm_meta
- end
-end
-
+end
document showallclasses
| Show the instance counts and ivar size of all OSObject subclasses. See ioclasscount man page for details.
| The following is the syntax:
@@ -2515,31 +1989,3 @@
| The following is the syntax:
| (gdb) showioalloc
end
-
-define readphys
- set kdp_trans_off = 1
- x/x $arg0
- set kdp_trans_off = 0
-end
-
-define readphys64
- if ($kgm_mtype == 18)
- set kdp_src_high32 = ((uint32_t) ($arg0)) >> 32
- x/x (uint32_t) (($arg0) & 0x00000000ffffffffUL)
- set kdp_src_high32 = 0
- else
- echo readphys64 not available on this architecture.\n
- end
-end
-
-document readphys
-| The argument is interpreted as a physical address, and the word addressed is
-| displayed. While this fails if no physical page exists at the given address,
-| it must be used with caution.
-end
-
-document readphys64
-| The argument is interpreted as a 64-bit physical address, and the word
-| addressed is displayed. While this fails if no physical page exists at the
-| given address, it must be used with caution.
-end